2
1
I have my house connected to the internet by high speed 5GHz wireless point to point link. Within the house is both a wired and wireless network. The wireless network is served by a linksys internet WRT54GC.
I now have an office that is not connected to the main house but will have it's own network. The wireless network in the house has a reasonable signal in the office. I have another WRT54GC and I'm wondering if it's possible to connect them together such that I can plug the IP desk phone into it and my desktop computer (which doesn't have a wireless network card) and yet be able to see the internet and house computer?
This is what it will look like:
Ubiquity Bullet ---- (WAN) WRT54GC (LAN) ----- House Computer
|
+---------------- WRT54GC (Office LAN)
(Wireless)
i.e. something like this:
Is this supported by the WRT54GC firmware?
Ok thanks. Looks like my WRT54GC doesn't support ddwrt. However, I have another router that looks like it might be. I'll try to flash that and see weather it'll work. – Matt H – 2010-07-06T04:01:12.760
no problem, good luck.
if you follow the link I posted above it should work fine, that is what I do here at home and it works great. – Luma – 2010-07-06T04:14:55.293
Thanks for the info. The WRT54GC wasn't supported. So in the end I bought a WRT54GL which is. Updated stock firmware to DDWRT and now I have a wireless client bridge and VPN set up. It's fantastic! – Matt H – 2010-08-02T04:00:27.537