0
I'm trying to connect to a Juniper EX2200 switch.
I have a crossover cable (edit just tried a rollover cable too) connected to the CON port on the back of the switch
this connects to an RJ45 to DB9 connecter
then that connects to a DB9 to USB connection.
I'm connecting over putty with
Speed (baud): 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control: None
Still nothing.
Could anyone tell me where im going wrong?
Regards
Nick
Posted 2019-07-27T06:29:19.523
Reputation: 1
Have you tried other baudrates? 9600 should be the default, but others could probably be configured. – Attie – 2019-07-27T09:22:38.917