0
I have a laptop (Win 10), and I always use Standby/Lid close for it. However, it randomly (especially on nights) turns on automatically (just the board; the screen is still off). Then it has intensive CPU load & noise. Even if I turn it off, very shortly after it again turns on. This also happens from hibernation.
- Nothing is set to "awaken this device" in
Device Manager
powercfg /devicequery wake_armed
showsnone
.- Event Viewer shows not much information
- It is new laptop, is not dirty or clogged ( thanks for pointing to that possible issue).
I've observed today and when I removed the power line and internet-cable, it didn't turn on automatically today.
p.s. "use shutdown" instead, is no way a solution.
1
Have you looked in the BIOS for power on settings like WOL, action on power loss. Also have a read of https://www.ghacks.net/2013/12/31/find-pc-wakes-stop/
– davidgo – 2019-01-10T08:13:39.380@davidgo answer would have been better i think, and i could also upvote your recommendation. – T.Todua – 2019-01-10T16:44:53.260
Thank you for your comment above. By the standards of the site my comment is not an answer because, while it hopefully pointed you in the correct direction it simply makes guesses. It would also largely be a "link only" answer which is frowned upon here. If you did find a solution yourself it is a good idea to post your solution as an answer and accept it so other people know what worked for you. – davidgo – 2019-01-10T18:50:06.450
@davidgo I think that "Look into BIOS to check WOL" is one answer (yeah, shorter, but still valid answer). however, as you wish. thanks – T.Todua – 2019-01-11T07:46:39.540