2
1
I cant enable remote desktop in windows 10 pro (build 1803). I toggle the button
.
clicks confirm
.
but the service is not toggled on
.
However, when I check the classic way of enabling RDP, it shows the service being ticked on. but unable to remote in. I did restart the RDP service too.
.
I was able to activate the RDP service by disabling the firewall rules under Public network settings
Unsure what rules is causing this issue yet.
aharen
Posted 2018-11-22T01:50:31.810
Reputation: 41
Where are you trying to connect from? If from outside the network, make sure you have port forwarding set up. – HazardousGlitch – 2018-11-22T02:13:11.737
I was able to activate the RDP service by disabling the firewall rules under Public network settings. Unsure what rules is causing this issue yet. see the updated images for clarity. the issue is that the service is started on the system due to some rules - something is preventing it. – aharen – 2018-11-22T02:26:31.557
Where are you trying to access the computer from? On the same network or outside of it? – HazardousGlitch – 2018-11-22T02:32:17.113
within the same network. I have figured out the issue now. The network profile was set to Public instead of Private. Under Private, with FW enabled, you can enable the RDP service without any issue. – aharen – 2018-11-22T02:34:06.503
Add it as the answer if it resolves the issue. – HazardousGlitch – 2018-11-22T02:36:40.223
1added the solution – aharen – 2018-11-22T02:41:22.583