0
I am having issues connecting via WireGuard on OpenWRT wirelessly.
I have followed ALL instructions on AzireVPN's website except for Firewall Zones settings, which I had to set as follows for it to work (it wouldn't work at all with their settings, not even via Ethernet):
https://i.imgur.com/3C749Hx.png
Now, here's what I have for my wireless settings, maybe you can shed some light so I can get this to work via WiFi:
https://i.imgur.com/2UTpJhn.png
Please note under Interface Configuration > Network there is no wg interface to choose from, I am unsure if this has anything to do with the issue:
https://i.imgur.com/PdgpCfi.png
Another bit of crucial information, my current (physical) network setup is as follows:
- Main DSL line connected to ISP router/modem
- OpenWRT router with WireGuard VPN installed connected via WAN to ISP router in ETH0 port.
- As you can see on one of the screenshots above, OpenWRT router's Mode is Access Point, ISP Modem/Router has DHCP activated.
As highlighted above, the issue is I am unable to get this to work via WiFi, it works via Ethernet when connected to OpenWRT router though.
Many thanks in advance!