0
0
I have this Crucial MX300 275GB 2.5'' 7mm SSD that I want to use as a external drive with an enclosure.
I bought a Sabrent 2.5-Inch SATA to USB 3.0 Tool-free External Hard Drive Enclosure but when I connect the drive to the computer it's not recognised by the system although the power indicator light turns on.
I was assuming the drive could be powered with one USB but now I wonder if the drive needs more power and that's why it's not showing up.
Is there a way to know how much power my SSD needs before I try making it work with a power USB or something like that?
Which operating system are you using? Just in case it's a driver issue... – Sir Adelaide – 2017-03-08T06:17:46.343
Thans @SirAdelaide, I'm using MacOS X, but I've tried in a PC with Windows 10 and in both is not recognised – Andres – 2017-03-08T06:20:48.260
http://www.crucial.com/usa/en/ct275mx300ssd1 says "Extreme Energy Efficiency technology within the Crucial MX300 reduces the amount of active power usage that's consumed by the drive. The Crucial MX300 extends your laptop's battery life by using only 0.075W of power, compared to a typical hard drive which uses 6.8W." So it is unlikely to be a power issue. More likely cables aren't plugged in right inside the hard disk enclosure. – Sir Adelaide – 2017-03-08T06:24:09.520
For reference, USB 2 can provide 2.5 Watts – Sir Adelaide – 2017-03-08T06:28:12.023
That make sense. In that case it's then unlikely to be a power issue. Thanks a lot for your help and the references. – Andres – 2017-03-08T06:34:56.513
For Windows, you might need to get into Disk Manager, and "activate" the drive before it can be accessible to OS. (I assume that USB is working and the device shows up in Disk Manager.) – Ale..chenski – 2017-03-08T17:18:24.003