3
Soooooo my system boots fine, its just that I underclocked it instead of overclocking.
First time overclocking much!
Alright now for the important stuff. I have an Intel i7 6700k. My mobo is an Asus Z170-e. If you didn't get it before, I tried overclocking but screwed up. How bad? This bad:
CPU Default clock: 4.00Ghz
My "over"clock: 3.00Ghz
I don't even know what I did! I thought I changed back the only setting I touched in my BIOS after noticing the 3.00Ghz, but it didn't change (can't remember setting name).
Should I reset to default BIOS settings? That would be a pain since I have 4 hard drives (boot order stuff)
Is there a way to go back without defaulting? Probably not since I'm not much help here, and I don't even know what setting I changed.
Thanks!
Should I reset to default BIOS settings?... Well, unfortunately that would be the simplest solution... Good Luck Josh M.!! – Pimp Juice IT – 2017-01-15T06:54:43.527
Without knowing what setting you changed, its pretty tricky. Its probably a good idea to just note down the settings you have now and change it back – Journeyman Geek – 2017-01-15T07:37:51.097
I assume you've received the answer by now. But the curiousity is killing me: How did you manage to underclock an ASUS Z170-e? That's impossible, thanks to its intelligent O.C. system! – None – 2017-01-15T08:02:29.623
You likely changed the voltage. You can use the overclocking tools provided by ASUS to restore the default configuration from within Windows. – Ramhound – 2017-01-15T11:25:37.377
@FleetCommand I figured out by now lol! My Multiplier was set to 30x and my BCLK was at 100MHz! Crazy, right? I fixed it by changing BCLK to 102.38 and multiplier to 42x for a solid 4.3GHz. – tycrek – 2017-01-15T19:35:56.363
@Ramhound Thanks for the suggestion, managed to fix it through BIOS. Don't remember changing voltage though – tycrek – 2017-01-15T19:36:50.457
@ITSolutions Fixed it! See my comment above – tycrek – 2017-01-15T19:37:42.413
Post an answer. Anything would be better then the answers you got. – Ramhound – 2017-01-15T19:40:33.600
@Ramhound Posted my own answer but "can't accept until tomorrow". Hope it's good – tycrek – 2017-01-15T20:59:42.160