1
I have tried upgrading firmware through wireless. I think it went fine I assume, as I can access my router through the web interface.
But now, I cannot connect to the internet, IP and DNS Server are at 0.0.0.0. I have called the Manufacturer Customer care for their help, but it did not resolve anything.
Then I tried to revert back to my original firmware version, but strangely I could not find the corresponding tab. There is nothing under Maintainence -> and even stranger there is no Tools tab.
I have tried to do an emergency flash, but no matter how many times I try, I never get to the page where I have to upload a firmware file.
Update 1
I am able to connect to router through telnet, how can I change my firmware through telnet.
I found these are the list of commands on my router
UPDATE 2
I have done the following, but there is no result
1. I have connected to my router through telnet
2. Setup TFTP Server on local subnet (192.168.0.2)
3. I have tried to use tftp client on router to dump the firmware but always face timeout
I have disabled firewall and window defender and even created a rule in inbound rules in firewall settings, but still face timeout.
**Screen Shot of TFTP Server Log **
saikumarm
Posted 2016-09-17T16:46:22.870
Reputation: 111
that's why updating on wireless is a bad idea. try telnet – Tony Stewart Sunnyskyguy EE75 – 2016-09-17T17:07:03.117
can you provide a guide? – saikumarm – 2016-09-17T17:09:34.857
if DLink support cannot fix, it's no good. – Tony Stewart Sunnyskyguy EE75 – 2016-09-17T17:12:04.973
they have asked me to contact broadband provider and get mac address released. which I did not understand – saikumarm – 2016-09-17T17:12:59.803
cable ISP's lock modem/router machine address (MAC) so no login is required and your WAN IP address is constant. Can you see menu item to clone MAC from PC to router? I don't believe that will fix router menu , but call ISP. Can you connect PC direct to modem? – Tony Stewart Sunnyskyguy EE75 – 2016-09-17T17:14:59.680
yes I can connect PC to modem using ethernet cable – saikumarm – 2016-09-17T17:20:00.590
can you record IP, DNS, gateway and setup manually? – Tony Stewart Sunnyskyguy EE75 – 2016-09-17T17:22:01.013
yes I can do, DLINK support guided me through that – saikumarm – 2016-09-17T17:23:21.787
then clone MAC address – Tony Stewart Sunnyskyguy EE75 – 2016-09-17T17:28:31.817