4
When swithing graphics cards' plates in order to transform them in high profile or low profile graphics cards, sometimes those screws are lost.
How can I get more of them? Which name or reference do I need?
They are almost identical to case-to-motherboard attaching ones, but they have a minimum size difference.
1
There may be a lead on the ebay store link in this thread (limited access atm, or I would check), looks to be exactly the stand-off/screw/nut you've got pictured - http://www.overclock.net/t/1243730/grafics-card-dvi-port-screw-nut-standoff
– panhandel – 2016-07-08T17:55:14.2071I always scavenge them from obsolete graphics cards. – David Schwartz – 2016-07-08T18:06:01.027
1If you have an old used computer store in town, they can usually find you some. Additionally, as long as you don't tension your cable, you are usually fine using only one screw (in fact I usually don't screw them in at all on the PC end; just the monitor end, since the weight of the cable will hang from that connection). – Frank Thomas – 2016-07-08T18:45:03.307
@DavidSchwartz too many graphics cards with no screws, too few old ones xD – Áxel Costas Pena – 2016-07-11T07:59:07.680
@FrankThomas no old PC stores here, small town... – Áxel Costas Pena – 2016-07-11T07:59:28.370