-1
I am attempting to push a .wim image through the latest version of WinPE and although WinPE boots up, no USB devices are recognized at all, including the one that WinPE booted from. I tried changing the formatting, NTFS nor Fat32 seem to work, I updated the BIOS (Dell OptiPlex 7040), and I tried different USB devices, and no luck. What can be causing this issue? Also, when I list disk, only the hard drive is listed.
I had initially thought USB 3.0 might have been the issue, but I also tried USB 2.0 and I ran across the same problem. I have also changed the boot method between both UEFI and Legacy with the same result. Please help.
USB 2.0 or 3.0??? – Moab – 2016-04-19T16:48:48.773
Similar Question – Moab – 2016-04-19T16:49:09.243
WinPE 3.0
andWinPE 3.1
do not support USB 3.0 devices unless the require driver is supplied to it. – Ramhound – 2016-04-19T17:13:57.367Even if I put the USB devices in the USB 2.0 ports it will not work. I have used the same 3.0 setup with several new HP desktops and laptops and it works successfully. – Fnavarro7309 – 2016-04-19T17:57:44.600
USB 3.0 is what I have used. Without problems. – Fnavarro7309 – 2016-04-19T17:58:41.930
Additionally, I tried a USB 2.0 device and the problem persisted. – Fnavarro7309 – 2016-04-19T18:02:22.813
Update: I have downloaded the latest version of WinPE and the problem is still there. It is really odd but no USB devices are picked up. – Fnavarro7309 – 2016-04-19T19:00:51.117