Sound output connector on CD-ROM drive?

6

1

My old CD reader has a volume knob and a minijack socket on the front. On the back it has the regular stuff (IDE interface, Molex power) plus a digital sound connector (DG) and an analog sound connector (RGGL). Is there a specific cable meant for connecting the digital or analog sound output to my motherboard, or do I have to solder one myself?

The CD-ROM drive is a Lite-On LTN-486 and has the ability play CDs and output the sound without communicating with a computer.

osvein

Posted 2013-03-15T17:39:38.197

Reputation: 243

Answers

7

Good definition of the CD-ROM cable here

A cable used to send audio CD sound to the computer's sound card. When playing audio CDs, CD-ROM drives output analog sound to both a headphones jack and external connector just like a CD player. This method is still the way audio CDs are played on a computer, but it was the only method available on earlier CD-ROM drives for extracting data from an audio CD. By the mid-1990s, most CD-ROM drives could pass the digital data over the computer's bus (see digital audio extraction).

PCs today use a standard four-pin cable; however, earlier cards and drives used connectors with three to six pins. Finding the right cable was a problem, and the earliest drives had no connector. An advantage of the multimedia upgrade kits that were popular before CD-ROMs were standard issue on a PC was that they included the card, drive and the correct cable. In lieu of this connection, a stereo cable from the headphones jack of the drive to the AUDIO IN of the sound card could always be used.

pc diagram

Also early drives would have custom interfaces and sound cards would need to support multiple plugs. You could find old SoundBlasters with 2-3 cable headers. The four-pin cable has now become the standard.

cable

Brad Patton

Posted 2013-03-15T17:39:38.197

Reputation: 9 939

My motherboard, ASUSTek M4A785TD-V EVO has an integrated sound card, and I can't find any detailed information about the sound card´s specifications, but as far as I know, the motherboard/sound card only have 3 internal audio connectors, 2 of them (1 analog stereo audio output and 1 analog stereo audio input) are already occupied (connected to the front panel), and 3rd one is an S/PDIF audio output. There are 2 audio input sockets on the backpanel. 1 (line-in) is occupied, the last one is for microphones. Can I connect the digital output on the optical drive to the internal S/PDIF? – osvein – 2013-03-15T18:46:04.343

Most recent motherboards will not have a header for CD-ROM audio instead relying on DAE. I referring to old sound cards (take a look at the SB 16 http://en.wikipedia.org/wiki/Sound_Blaster_16) it has like 4 audio headers at the top of the card.

– Brad Patton – 2013-03-15T18:53:48.020

3

A cable to connect the analog output to your soundcard was probably supplied with your CD-ROM drive.

Below is a picture of the connector (taken from Wikicommons). You can see also the standardized layout of the 4pin analog output (from left to right)

[Right channel] [Ground] [Ground] [Left channel]

Audio output of a CR-ROM drive

mpy

Posted 2013-03-15T17:39:38.197

Reputation: 20 866

Asked: 2013-03-15T17:39:38.197

Viewed: 21 748 times

Active: 2014-06-22T14:36:18.027