What files does the Windows 7 upgrade disc look for?

5

I have a valid copy of Windows XP and a purchased a Windows 7 upgrade disc.

I like to wipe my drive clean when reinstalling my OS. However, the upgrade disc fails to install if it doesn't find a valid copy of XP on the disc.

Rather than going through the trouble of installing XP and then installing 7, is there a way I can "spoof" an XP install by placing some key files and the upgrade disc looks for on the hard drive?

matpie

Posted 2011-08-31T23:41:49.687

Reputation: 1 560

Question was closed 2012-01-28T07:04:59.933

Answers

5

Here are the instructions for a hack that claims it allows you to perform a Windows 7 install via an upgrade license on a formatted or blanked drive.

  1. Boot up the PC with the Windows 7 Upgrade DVD disc media into DVD-ROM drive.
  2. Follow the Windows 7 Install Wizard to install the operating system
    • During installation, when prompted for a product key, DO NOT enter a Product Key
  3. Unselect the check box for Automatically activate Windows when I’m online during the installation
  4. Boot up to the desktop after Windows 7 finish installing
  5. Activating Windows by one of the following options:
    • Manually enter the Windows 7 Upgrade Product Key to activate online
    • Activate via phone.

Note: The source of these steps are found here. If the above fails, there are three workarounds at the source's page. Two of three doesn't require reinstalling Windows 7.

Disclaimer: I haven't tested this. Use at your own risk.

SgtOJ

Posted 2011-08-31T23:41:49.687

Reputation: 6 843

1

+1 as I was about to mention that site! Also some useful info here: http://www.winsupersite.com/article/win7/clean-install-windows-7-with-upgrade-media

– Linker3000 – 2011-09-01T00:07:48.737

1

There's no need for hacks. As explained in another SuperUser question that actually asks about the goal and not the step ("Is it possible to remove all partitions when upgrading from Windows XP to Windows 7?"), the official Microsoft way to do this is to start the Windows 7 installer, and erase and re-create one's disc partitions from within the setup utility.

JdeBP

Posted 2011-08-31T23:41:49.687

Reputation: 23 855

W7 Upgrade media will not allow a clean install to a blank hard drive. XP or Vista partition needs to be present before install will proceed. – Moab – 2011-09-01T02:49:06.510

He doesn't want to install an older version of Windows first. He wants to install Windows 7 via an upgrade license on a hard drive that's currently blanked -- no Windows. – SgtOJ – 2011-09-01T04:21:54.630

The question does not say that, if you read it. It says that xe likes to do that, not that xe has actually yet done it. There is an official Microsoft way to do what xe likes to do. – JdeBP – 2011-09-01T08:36:59.013

Asked: 2011-08-31T23:41:49.687

Viewed: 473 times

Active: 2011-09-01T04:49:29.427