Is there any command line tool that can be used to edit environment variables in Windows?

Question

Is there any command line tool that can be used to edit environment variables in Windows?

It would be nice if this was smart tool, for example:

• When adding some path to let's say the PATH variable and this path is already there it shouldn't double this entry.
• Inserting a new path to the PATH variable should be possible before/after some other path or in specific order (the first, the 7th, the last etc.).
• It should be possible to change only part of variable's value (in case of the PATH a given path from a list of all paths).

And the last but not the least - I want my changes to persist between sessions so simple SET is out of question...

There's very nice GUI tool for this called Path Editor and I need something like this but for command line.

Answer 1

Path Manager (pathman.exe) from Windows Server 2003 Resource Kit Tools is the closest match I could find. It was already available in NT Resource Kit.

Answer 2

I don't know any tool that does this, but maybe you can use the regcommand:

reg query "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment" /v Path

to read the current path, and

reg add "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment" /v Path /d "newPath" /f

to write your new value.

You need admin rights for hsving right acccess in HKLM. If that is a problem, consider modifying the user specific path setting in HKCU\Environment instead.

Answer 3

If you need a generic way to set any environment variable and have the changes persist, then setx.exe would be the tool to use. It cannot do the "smart" things you are asking for, though...

setx.exe is included with Windows Vista or later; if you use an earlier version of Windows, you can use the above download link to get it.

Answer 4

For the current program, there is path:

Displays or sets a search path for executable files.

PATH [[drive:]path[;...][;%PATH%]
PATH ;

Type PATH ; to clear all search-path settings and direct cmd.exe to search only in the current directory.

Type PATH without parameters to display the current path. Including %PATH% in the new path setting causes the old path to be appended to the new setting.

However, this is pretty much the same as set PATH.

For environment variables to persist you have to edit the registry or use setx.

Answer 5

I just discovered the ability to allow the users to run the Environment Variables edit dialog without elevated privileges.

From the Start menu, run the following:

rundll32 sysdm.cpl,EditEnvironmentVariables

Answer 6

set PATH

(help set)

Answer 7

You might wanna check out pathed of the gtools collection: http://www.p-nand-q.com/gtools.html

It provides a set of commands for the command promt like

pathed /APPEND %CD% /USER

to append the current path for example. I haven't really checked it out to be honest, as I'm totally fine with using a GUI.

Other options are:

  /MACHINE: print machine PATH
     /USER: print user PATH
      /ADD: add variable at the head
   /APPEND: add variable at the tail
   /REMOVE: remove path / index
     /SLIM: strip duplicate vars
      /ENV: environment variable, defaults to PATH

Together with which of the same collection, you got yourself some good tools, I suppose. Which "locates executable files on the PATH".

 /EXTENSION: search for extension , can be a ; separated list
       /DIR: add directory , can be a ; separated list
 /RECURSIVE: search directories recursively
    /SINGLE: stop after the first find result
       /ENV: environment variable, defaults to PATH
FILE {FILE}: one or more files to find

Source: http://op111.net/82/

Answer 8

I wrote a set of batch scripts for this. addpath.bat adds elements to the path, rmpath.bat removes elements from the path, and lpath.bat just lists the path. But then I needed some support scripts, so there is also chkpath.bat .

It ended up being not trivial and required tr.exe and cat.exe, a couple of unix-style utilities. The reason its not trivial: no backticks in cmd.exe (though you can use for loops for this), and short names versus long names.

addpath.bat:

@echo off
setlocal
set cwd=%~dps0

goto testit

:loopy

call %cwd%chkpath "%~1"
if %errorlevel%==2 (
  set path=%path%;%~1
)

shift

:testit
if not _%1==_ goto loopy


call %cwd%lpath.bat

endlocal & set path=%path%

ChkPath.bat:

@echo off
goto START

-------------------------------------------------------
chkpath.bat

checks path for existence of the given segment.
Returns 1 if present, 2 if not present, 0 if not checked.

The matching and checking complicated by case sensitivity and "short pathnames".

created sometime in 2003 and lovingly maintained since then.


-------------------------------------------------------

:START
setlocal enabledelayedExpansion
set rc=0
set cwd=%~dps0
set curdrive=%~d0
set tr=%curdrive%\bin\tr.exe
set regexe=%windir%\system32\reg.exe


if _%1==_ goto Usage


@REM convert arg 1 to a fully-qualified, short path name,
@REM and then convert to uppercase.
set toupper=%~fs1
call :ToUpper
set tocheck=%toupper%


if not _%TEMP%==_ goto GotTemp
call :gettemp


:GotTemp
set d=%DATE:~4%
set stamp=%d:~6%%d:~3,2%%d:~0,2%%TIME::=%
set d=
set tempfile1=%TEMP%\chkpath1-%stamp%.tmp

echo %path% | %tr% ; \n  >  %tempfile1%

@REM check each element in the path for the match:
for /f  "delims=^" %%I in (%tempfile1%) do (
  if !rc!==0 (
call :CheckElt "%%I"
  )
)

if %rc%==0 set rc=2
goto END


--------------------------------------------
* checkelt
*
* check one element in the path to see if it is the same
* as the TOCHECK string. The element is first canonicalized.
*

:CheckElt
@REM remove surrounding quotes
set ERF=%1
if [x%ERF%]==[x] goto CheckEltDone
@REM convert to fully-qualified, short paths, uppercase
set TOUPPER=%~fs1%
call :ToUpper
if _%TOCHECK% == _%TOUPPER% set rc=1
:CheckEltDone
goto:EOF
--------------------------------------------


--------------------------------------------
* backtick
*
* invoke a command and return the result as a string.
* This is like backtick in csh or bash.
* To call, set variable BACKTICK to the command to be run.
* The result will be stored in the env variable of the same name.
*

:backtick
FOR /F "usebackq delims=" %%i IN (`%backtick%`) DO (
  SET backtick=%%i
)
goto backtick_done
:backtick_none
  SET backtick=nothing to exec
:backtick_done
goto:EOF
--------------------------------------------


--------------------------------------------
* gettemp
*
* get the temporary directory, as stored in the registry.
* Relies on backtick.
*
* The result set TEMP.
*

:gettemp
set regkey=HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
set regvalname=Local AppData
set backtick=%regexe% query "%regkey%" /v "%regvalname%"
call :backtick
for /f "tokens=4" %%a in ("%backtick%") do (
  set temp=%%a
)
goto:EOF
--------------------------------------------



--------------------------------------------
* ToUpper
*
* Convert a string to all uppercase.
* To call, set variable TOUPPER to the thing to be converted.
* The result will be stored in the env variable of the same name.
*

:ToUpper
  FOR /F "usebackq delims=" %%I IN (`echo %toupper% ^| %tr% a-z A-Z`) DO (
SET toupper=%%I
  )
goto:EOF
--------------------------------------------


--------------------------------------------
:CleanUp
  if _%tempfile1%==_ goto CleanUpDone
  if exist %tempfile1% del %tempfile1%
  :CleanUpDone
goto:EOF
--------------------------------------------


--------------------------------------------
:Usage
echo.
echo Usage: chkpath ^<path^>
echo checks if path element is included in path variable.
echo returns 1 if yes, 2 if no, 0 if not checked.
echo.
goto END
--------------------------------------------


:END
call :CleanUp

:ReallyEnd

endlocal & set errorlevel=%rc%
@REM set errorlevel=%rc%
@REM echo %errorlevel%

lpath.bat:

@echo.
@set curdrive=%~d0

@REM This form post-fixes a | at the end of each path element. Useful for debugging trailing spaces.
@REM @path | %curdrive%\cygwin\bin\sed.exe -e s/PATH=// -e 's/;/^|\n/g' -e 's/$/^|/g'

@REM This form shows bare path elements.
@REM @path | %curdrive%\cygwin\bin\sed.exe -e 's/PATH=//' -e 's/;/^\n/g'
@path | %curdrive%\utils\sed -e "s/PATH=//" | %curdrive%\utils\tr ; \n
@echo.

Answer 9

How to check if directory exists in %PATH%? on Stack Overflow has an outstanding description of what makes Windows PATH editing difficult along with a batch file to overcome them. Figuring out how to properly use addpath.bat took a bit of practice as it's calling structure was new to me, but this works:

set _path=C:\new\directory\to\add\to\path
call addpath.bat _path
set _path=

and repeated firings won't add the new directory if it's already present. This doesn't address making the edits persistent across sessions.