System Center Virtual Machine Manager helps enable centralized management of physical and virtual IT infrastructure, increased server utilization, and dynamic resource optimization across multiple virtualization platforms. It includes end-to-end capabilities such as planning, deploying, managing, and optimizing the virtual infrastructure.
Questions tagged [scvmm]
111 questions
1
vote
3 answers
Will VMWare Converter P2V a non-ACPI 2000 server?
SCVMM is unable to handle this conversion - just tells me flat out that my Proliant 3000 (yes, go ahead and laugh) isn't a P2V option unless I upgrade it to 2003 server for an online conversion.
Just wondered if anyone had already skinned this cat…
![](../../users/profiles/1803.webp)
Kara Marfia
- 7,892
- 5
- 32
- 56
1
vote
1 answer
HyperV/VMM folder- and VM-level permissions?
With VMWare and vCenter, I'm used to creating folders in a filesystem manner to delegate permissions to users within the organization. For example, I might create a folder named QA, place all the QA VM's within that folder, and allow the QA Active…
![](../../users/profiles/24051.webp)
Dan
- 1,278
- 18
- 27
1
vote
1 answer
SCVMM Error 10644 - Missing WAIK files in the GAC
I cannot create a new SCVMM VM from a template. The creation fails with:
Error (10644) Virtual Machine Manager
cannot access the WAIK (Windows
Automated Installation Kit) Image
Manager DLLs. Recommended Action
Install WAIK and ensure that…
![](../../users/profiles/48531.webp)
Adam Driscoll
- 121
- 5
1
vote
1 answer
Hyper-V management. RSAT or SCVMM?
I have a relatively light duty Hyper-V server running 2 production servers and 3 dev servers. I've been using the RSAT with the Hyper-V role installed, and it seems to do just fine when it comes to managing the server's storage and VMs. I decided to…
![](../../users/profiles/9007.webp)
DanBig
- 11,393
- 1
- 28
- 53
1
vote
1 answer
iso is already present on server
I'm using SCVMM R2 with Windows 2008 R2 hosts.
I've noticed that if I have an iso mounted on a vm from the scvmm library and then a snapshot is restored then you always get an error
.iso is already present on server when trying add it again.
I know…
andygriff
1
vote
1 answer
Creating new (self-signed?) certificate for SCVMM
I have a Server 2012R2 machine that hosts System Center. During SCVMM installation, it created itself a self-signed certificate for use with SCVMM connections. Unfortunately, it created one with a SHA-1 hash, which trips our vulnerability scanners…
![](../../users/profiles/591107.webp)
The ITea Guy
- 95
- 3
- 11
1
vote
1 answer
SCVMM 2016 server sending DHCP requests
We have a Hyper-V 2012 r2 cluster and I have just upgraded our SCVMM to 2016. The VMM is installed on a VM in the cluster.
Our DHCP server is a VM in the cluster with filters enabled. We have configured SCOM to email us whenever someone attempts to…
![](../../users/profiles/591693.webp)
Rahamim Levi
- 11
- 2
0
votes
2 answers
Hyper-V, Domain Controllers, and System Center Virtual Machine Manager R2 (SCVMM)
I'm trying to add one of my Hyper-V Hosts (Windows Server 2008 R2), which is also my domain controller, to the SCVMM console so that I can manage it and its guest VM's from there. When adding it to the console I get an error message that…
![](../../users/profiles/3066.webp)
rmwetmore
- 432
- 1
- 5
- 10
0
votes
2 answers
Cannot add Server 2016 Core cluster to SCVMM, Error 410
I'm trying to add a four host, Server 2016 Core Cluster to SCVMM 2016.
I keep getting the following error when SCVMM tries to install the agent on all four hosts:
Error (410)
Agent installation failed on co-hvsrv-10.ccac.org.
The dependency service…
![](../../users/profiles/476898.webp)
afuoco
- 1
- 4
0
votes
0 answers
System center 2016 with VMM un-recommended configuration
I have Windows 2016 host running with the Hyper-V role running. There will only be a few VM's running and there's less than 10 actual users so activity will be minimal.
I have 3 options from management on this which are both not best practices by…
![](../../users/profiles/215620.webp)
Brad
- 250
- 1
- 11
0
votes
1 answer
SCVMM 2016 console not loading after UR3 (?)
I'm managing several servers with SCVMM, and just the other day the VMM console lost connection to the server, and is now refusing to connect. I think it coincided with the CU3 update that came over Windows Update, but that might be a red…
![](../../users/profiles/40879.webp)
Artiom
- 145
- 3
- 9
0
votes
1 answer
Hyper-V P2V Virtual Machine Bus driver
Did my first P2V experiment with SCVMM R2 - Vista 32 (Dell Precision 490) to Hyper-V on Windows Server 2008. I'm having issues with "integration Services" and "virtual machine bus" driver.
When I install Integration Services it claims to install…
![](../../users/profiles/2358.webp)
ScottStonehouse
- 979
- 4
- 16
- 25
0
votes
1 answer
Unable to add a subsequent node on a VMM HA Cluster
Due to assortment of problems, a planned VMM Cluster was only created with a single node. When the second node was later added and joined to the cluster, VMM could not be installed.
The following error was believed to be related to the…
![](../../users/profiles/309653.webp)
int_541
- 151
- 3
0
votes
1 answer
Any variation of SCVMM or prev gen VMM product that can run as guest on a Hyper V VM under Server 2008?
I just downloaded and tried the SCVMM 2012 Evaluation VHDs and realized that the Document mentioned 2008 R2 as a VM Host (probably as a minimum).
Is there a variation/ previous generation product in the same line (SC VMM/ VMM) from Microsoft that…
![](../../users/profiles/378284.webp)
ProBonNonProfitVolunteer
- 11
- 1
- 4
0
votes
1 answer
powershell command to get a list of all the snapshot in vmm (hyper-v)
i am using below script to get snapshot which are associated with my particular VM, but i am getting only recent snapshot information , can someone correct me in below script -
$vmcheck = Get-VM -name VMNAME | where {$_.LastRestoredVMCheckpoint…
![](../../users/profiles/295550.webp)
kamlesh bhatt
- 51
- 1
- 2
- 5