Server Fault Stack Exchange
Server Fault Stack Exchange

Questions tagged [pfsense]

pfsense is a customized FreeBSD+pf distribution designed for use as a firewall. It wraps many of the features of the pf firewall code in an easy-to-use web interface.

pfSense is an open-source firewall product built on top of FreeBSD and the OpenBSD pf firewall.
It provides a graphical (web-based) interface for configuring and managing firewall rules, as well as viewing traffic and firewall decisions (accept/reject).

pfsense is available as a pre-built applicance (such as OPNSense or StrongBochs) or as installable software directly from the pfSense project's site.

pfsense is similar in concept to m0n0wall, however as of this writing m0n0wall uses the ipfilter packet filter.

811 questions
0
votes
2 answers

Slow upload speeds with pfsense virtual appliance

I have a pfSense virtual appliance set up in front of a Windows server. The pfSense appliance has been configured with two L2L IPSec VPN sites and not too much else. The appliance has two vNics which both exist on the same VLAN, but one is "WAN" and…
tacos_tacos_tacos
  • 3,220
  • 16
  • 58
  • 97
0
votes
1 answer

Transparently proxying HTTP to a SOCKS server that is provided by SSH on an Ubuntu box in pfSense

I'm trying to transparently proxy HTTP requests in a LAN that is served by a pfSense router over SSH. So far, I've tried setting up an Ubuntu box outside that network and forwarding everything going outward that's HTTP to redsocks on the outside…
nelsonjchen
  • 113
  • 1
  • 5
0
votes
1 answer

PFsense not working with second subnet

192.168.1.5 PC can go online 192.168.2.5 PC can not go online but can ping 192.168.1.1 When PF Sense is rebooted 192.168.2.5 can ping an internet address briefly but then stops once PF Sense is fully loaded. Any idea what could be causing this? I do…
evolvd
  • 1,374
  • 6
  • 33
  • 58
0
votes
2 answers

Setting up new gateway to split 1 internet feed to 3 networks

I am looking for some words of wisdom from the members of this forum. I do consulting work for three related non-profits in the same building. The three have decided to share the same internet pipe and have tasked me with building a new gateway box.…
Jesse Nelson
  • 1
0
votes
1 answer

Radius authentication for OpenVPN in pfSense

I have a pfSense Firewall with OpenVPN against RADIUS Server configured in a Windows Server 2008 R2. The RADIUS server is configured in pfSense, but when I try the Authentication (Diagnostics -> Authentication) I always get an Authentication Failed…
Mike B
  • 370
  • 2
  • 4
  • 20
0
votes
1 answer

M0n0wall won't pass traffic on different LAN subnets unless "Bypass firewall rules" is checked

I have a working configuration, but a question is bugging me. The question centers around having multiple subnets on a single interface. LAN: 10.10.10.1/24 OpenVPN Server LAN IP: 10.10.10.250 OpenVPN Server virtual subnet: 10.11.10.0/24 LAN Static…
Zen Master
  • 131
  • 1
  • 6
0
votes
1 answer

Problems directing traffic over our site-to-site VPN

We have two offices connected via Gateway-Gateway VPN DC1[192.168.0.101]---RV082(A)[192.168.0.1]---[VPN]---RV082(B)[192.168.3.1]---pfSense[192.168.3.100]---DC2[192.168.1.2] DC2 is able to connect to DC1 just fine using the private IP Address of…
Sean
  • 1
  • 2
0
votes
2 answers

Both DC's able to connect to branch office, Branch DC can only connect to one local DC

I am stumped on this one, I appreciate any help with this scenario because this just seems odd. We have 3 domain controllers: DC1 - 192.168.1.2 - main office (LAN port of PFSense) DC2 - 192.168.1.4 - main office (LAn port of PFSense) PFSense -…
Sean
  • 1
0
votes
1 answer

pfSense Squid Transparent: HTTPS works not on clients using Virtual IP?

Here's my config pfSense LAN's Real Interface IP: 192.168.1.1/22 Virtual IP1: 10.1.1.1/24 Client PC 1 LAN IP: 10.1.1.2/24 Client PC 2 LAN IP: 192.168.1.2/22 Client PC 1 cannot access HTTPS websites (connection timeout). Normal HTTP is OK. Client PC…
stramatum
  • 27
  • 2
  • 5
0
votes
2 answers

using "include" like statement in pf.conf to include some parts from other files

I want to be able to include some parts of my pf.conf from other set of files. For example I will include "set timeout" vs like statements in another file. Using anchors and "load anchor from file" statements will not help because anchor can not…
seaquest
  • 668
  • 2
  • 11
  • 25
0
votes
2 answers

Hypercom Optimum T4220 POS Credit Card Terminal Fails ISP Test With Successful DHCP lease from a pfsense Netgate Appliance with static IP DSL WAN

This has been an ongoing issue for a couple of weeks. The credit card terminal will lose the ability to connect to the processor server over SSL. The IP config looks correct, the DHCP lease looks legit and it appears to have connectivity to the…
unhappyCrackers1
  • 977
  • 1
  • 6
  • 18
0
votes
1 answer

Linux Firewall - Complex Scenario

Ok, heres the situation I'm trying to resolve. We've got two ISPs each providing a block of 5 static addresses. Right now we've got a pair of Cisco 2610 routers managing them. Things were mostly running fine, then we added additional bandwidth that…
ErnieTheGeek
  • 2,027
  • 16
  • 22
0
votes
1 answer

PFSense CSR Generation

I'm trying to figure out how to generate a CSR so I can generate and install a SSL cert. Here's a link to what I've what tried. Granted that post was for m0n0wall, but I figured openssl is openssl. Heres where I get stuck. When I run…
ErnieTheGeek
  • 2,027
  • 16
  • 22
0
votes
2 answers

What package is dirname located in for freebsd

I am trying to install some software on pfsense 1.2.3 but the scripts are complaining about not finding the dirname binary. I have done a find on the system but cannot find it, and google is not helping either.
user65682
  • 3
  • 1
0
votes
1 answer

pfsense multi-site VPN VOIP deployment

have main office pfsense firewall configured like this: local networks WAN -> internet LAN -> local network VOIP -> IP phones need to connect remote offices (multi-users) and single remote users (from home) use IPSEC or OpenVPN to build…
sysconfig
  • 31
  • 4
1 2 3
…
54 55