"Smart Array" is the name used by Hewlett-Packard's line of enterprise-grade RAID controllers.
Questions tagged [hp-smart-array]
490 questions
-1
votes
1 answer
MSA70 Upgrade options
Recently I purchased MSA70. Unfortunately I did read specs properly.
In my project, I need as much I/O operations as possible.
MSA70 is only 3Gbps, so my question is: is it any possibility to upgrade it to 6gbps, by replacing/adding better…
Richard
- 3
- 1
-1
votes
2 answers
Enable Smart Array P400 HP Proliant DL 120 G7
I have a HP ProLiant D7 120DL with a Smart Array P400. After doing BIOS "Restore Default System Settings" the Smart Array can't see the drives attached to it.
When starting the server, Smart Array checks for disks, but POST the message "No drives…
amicoderozer
- 119
- 5
-2
votes
3 answers
P212 Smart array not configured
First of all thanks for all your help.
I have purchased a used HP DL380 G7 for my home.
This is my first server installation and all going well for the raid configuration P410I and ESXI installation.
I have purchased a D2600 with a P212 raid with…
westh
- 1
- 1
- 4
-2
votes
1 answer
HP Proliant DL380 Gen9
I have HP proliant DL380 Gen9
I do the installation oracle linux 6.4 and installation does not detect the logical drive created. i have 300GB SAS- on raid 0 logical drive
-2
votes
2 answers
High IO latency on ESXi 4.1 on HP DL580 G7
at my Company we were experiencing some weird spikes on IO latency on one of our ESXi instances.
we've spend 24h figuring out whats wrong and no clue so far.
after giving up we put all the disks into a different server (HP DL380 G7) with much less…
teddydestodes
- 11
- 3
-2
votes
2 answers
Red Hat 5.3 on HP Proliant DL380 G5 and failed drive on RAID controller
I have a development ERP server here in my office that I assist with support on, and originally the DBA requested a single drive setup for some of the drives on the server. Thus the hardware RAID controller (an HP embedded controller) looks…
thinkdreams
- 187
- 2
- 2
- 8
-3
votes
1 answer
Extend RAID 5 to use unused space and add additional disks?
I am new to RAID. I want to extend an existing RAID 5.
The current setup is as follows:
Array A
unused space : 349956 MB
logical drive :1
total size 273GB
raid5
disk : /dev/cciss/c0d0
physical
1I:1:5 - 146gb
2I:1:1 - 146gb
2I:1:2 - 146gb
2I:1:3…
Aj K
- 1
- 1
- 2
-4
votes
2 answers
Data recovery from deleted raid array
Hello I deleted a raid 1 array on a hp b110i and I wanted to know if it is possible to recover the data. Also if Windows server was on the array that was deleted can it be recovered.
Thanks
user
- 93
- 1
- 2
-5
votes
1 answer
HP's $1,000 RAID Controller is outclassed by on-board raid?
HP's $1,000 Smart Array P822 controller is outclassed by an on-board raid controller. I'm having a hell of a time trying to figure this one out. My problem is that performance on the HP controller is significantly below what the drive is capable…
DrWhy
- 11
- 1
-5
votes
2 answers
P812 "forgot" RAID6 - can't see disks at boot time in ORCA
We have an MSA60 with 12x4TB non-HP issue Seagate Constellation ES.3 drives connected to a P812/FBWC, on which I created a RAID6 over all of those disks with hpacucli and started to copy data on them.
Also, I pulled one of the drives during the…
elpollodiablo
- 33
- 5