Rbick
March 20th, 2007, 07:37 PM
For the most part, I enjoy video taping my charges when I detonate them for review later and just for kicks. Although I do not do this every time, I do it a good percentage of the time. So I thought I would share some of my videos and information about each one. If you guys have any you'd like to share, I would like to see them. I hope to record a few more AN/Fuel charges using different fuels and compare them, but thats for later. You'll have to excuse the poor sound quality of my camera, as it doesn't capture all the sound that well, causing the explosions to sound weeker than they were.
This one is 250g of an AN mixture detonated by .5g AP cap with a 40g APAN booster. I used 92% activated AN, 6% acetone, 1% AL 600 mesh and 1% MnO2. I add AL and MnO2 to all my AN charges to sensitize and add more blasting power. This was buried about 20cm under ground.
250g ANA (http://s164.photobucket.com/albums/u6/pudgedog69/Compile/?action=view¤t=ANA-MnO2-Al.flv)
This was 200g of ANFO using the same method as above aside from the fuel.
200g ANFO (http://s164.photobucket.com/albums/u6/pudgedog69/Compile/?action=view¤t=200gANFO.flv)
This one is 100g of AN/Brush Cleaner (Containing MEK, toulene, methyl alcohol, Aliphatic Hydrocarbon and Isopropanol)I used the same method as above. It seemed to be the most brisant of the 4 I tested that day (not taped is my 100g charge of AN/Naptha Petroleum, which was also quite brisant).
AN/Brush Cleaner (http://s164.photobucket.com/albums/u6/pudgedog69/Compile/?action=view¤t=ANBrushCleaner.flv)
This is 30g charge of APAN and a snowman, I thought it was funny...
Snowman (http://s164.photobucket.com/albums/u6/pudgedog69/Compile/?action=view¤t=snowman.flv)
This I actually just did about an hour ago. Its just 60g of KCLO4 and AL 600 mesh in a medicine bottle placed in a plastic bag with a rock. I thought it was k3WL though.
Underwater Det. (http://s164.photobucket.com/albums/u6/pudgedog69/Compile/?action=view¤t=Water.flv)
This one had to be put into pictures, because the video file was far too large. Its 500g of APAN (insane... I know) put underneath 7.5L of 87 octane gasoline. We were standing about 100m away and put a 1 min. fuse on it.
#1 (http://i164.photobucket.com/albums/u6/pudgedog69/Compile/1.jpg)
#2 (http://i164.photobucket.com/albums/u6/pudgedog69/Compile/2.jpg)
#3 (http://i164.photobucket.com/albums/u6/pudgedog69/Compile/3.jpg)
#4 (http://i164.photobucket.com/albums/u6/pudgedog69/Compile/4.jpg)
#5 (http://i164.photobucket.com/albums/u6/pudgedog69/Compile/5.jpg)
#6 (http://i164.photobucket.com/albums/u6/pudgedog69/Compile/Crater.jpg)
Thats it for now. I thought about puting this in the explosives section but I fear getting banned :D When I complete my project with the AN/Fuel mixtures, I will put that in the HE section... So post away guys.
This one is 250g of an AN mixture detonated by .5g AP cap with a 40g APAN booster. I used 92% activated AN, 6% acetone, 1% AL 600 mesh and 1% MnO2. I add AL and MnO2 to all my AN charges to sensitize and add more blasting power. This was buried about 20cm under ground.
250g ANA (http://s164.photobucket.com/albums/u6/pudgedog69/Compile/?action=view¤t=ANA-MnO2-Al.flv)
This was 200g of ANFO using the same method as above aside from the fuel.
200g ANFO (http://s164.photobucket.com/albums/u6/pudgedog69/Compile/?action=view¤t=200gANFO.flv)
This one is 100g of AN/Brush Cleaner (Containing MEK, toulene, methyl alcohol, Aliphatic Hydrocarbon and Isopropanol)I used the same method as above. It seemed to be the most brisant of the 4 I tested that day (not taped is my 100g charge of AN/Naptha Petroleum, which was also quite brisant).
AN/Brush Cleaner (http://s164.photobucket.com/albums/u6/pudgedog69/Compile/?action=view¤t=ANBrushCleaner.flv)
This is 30g charge of APAN and a snowman, I thought it was funny...
Snowman (http://s164.photobucket.com/albums/u6/pudgedog69/Compile/?action=view¤t=snowman.flv)
This I actually just did about an hour ago. Its just 60g of KCLO4 and AL 600 mesh in a medicine bottle placed in a plastic bag with a rock. I thought it was k3WL though.
Underwater Det. (http://s164.photobucket.com/albums/u6/pudgedog69/Compile/?action=view¤t=Water.flv)
This one had to be put into pictures, because the video file was far too large. Its 500g of APAN (insane... I know) put underneath 7.5L of 87 octane gasoline. We were standing about 100m away and put a 1 min. fuse on it.
#1 (http://i164.photobucket.com/albums/u6/pudgedog69/Compile/1.jpg)
#2 (http://i164.photobucket.com/albums/u6/pudgedog69/Compile/2.jpg)
#3 (http://i164.photobucket.com/albums/u6/pudgedog69/Compile/3.jpg)
#4 (http://i164.photobucket.com/albums/u6/pudgedog69/Compile/4.jpg)
#5 (http://i164.photobucket.com/albums/u6/pudgedog69/Compile/5.jpg)
#6 (http://i164.photobucket.com/albums/u6/pudgedog69/Compile/Crater.jpg)
Thats it for now. I thought about puting this in the explosives section but I fear getting banned :D When I complete my project with the AN/Fuel mixtures, I will put that in the HE section... So post away guys.