Introduction

This guide will help you to completely disassemble your phone in order to perform other repairs.

  1. toA3VyYLHjHfSAvb
    • Uniden EXP371 900 MHz Cordless Phone.

    • 900 MHz Extended Range with One Touch RocketDial/Find Handset Locator and is Desk or Wall Mountable.

  2. nMsXGu2EdswZaoUT
    nMsXGu2EdswZaoUT
    BDZoq6oiU4JdcCNp
    • Remove the battery by first pressing down on the rear of the cover and pushing the cover towards the bottom of the phone.

    • Next remove the battery by pulling on the connector.

  3. 4XZjXNFZXGswScxR
    4XZjXNFZXGswScxR
    r5BRV4RXChCdFp1c
    • Next remove the two screws at the bottom of the phone with a PH1 philips screwdriver.

    • Now remove the top portion of the case from the bottom. This may be difficult to do with your bare hands. The use of a plastic opening tool may come in handy.

  4. YKYigfEbJbdDEFpI
    YKYigfEbJbdDEFpI
    uBcOMOHCTGJi4SRp
    wq2ENk1MiENBGx2H
    • Your next step is to remove the five screws holding down the motherboard. Use the PH1 philips screwdriver.

    • Once you have removed the five screws you may lift the motherboard off of the front case.

    • At this point you may also remove the dial pad. It simply lifts off.

    • You may also remove the speaker if needed by unscrewing the two screws using the PH1 philips screwdriver.

    • The whole phone is now disassembled at this point.

Tim Reimer

Member since: 19/06/10

165 Reputation

One comment

this guide is poorly written, please delete or improve it.

Walker Quine -