Microsoft Wireless Mobile Mouse 1850 Teardown

Written By: Jed Calvert
Published: 12/05/20
  • Comments: 3

Microsoft Wireless Mobile Mouse 1850 Teardown

Published: 12/05/20

Teardown

Introduction

  1. gRuIdCWSy6AMYIY4

    • I unclipped the 9 clips holding the top case to the body.

  2. WMbxJ3SYxEcpnUCJ

    • I unscrewed the 3 Torx T6 Screws holding the body onto the bottom case

  3. FpHuvAGqYkdGSELd

    • I undid the two Philips #00 screws on the motherboard

  4. EOw4iWOrTCvFThsP

    • That’s it!

Author

Jed Calvert

Member since: 03/02/20

293 Reputation

3 comments

Good work easy to understand instructions

jhoneycutt323 -

My mouse had a battery leak inside of it. I removed the dud battery and tried to clean it a little but it would not work. After following these instructions I was able to fully disassemble the mouse and clean it out with soapy water, rinse in clean water, dry off with compressed air, and then clean in isopropyl alcohol and dry off with compressed air.

The mouse now works perfectly and doesn't need to go to the landfill.

Thank you very much!

Sam

Sam Stockwell -

Well done on saving it instead of dumping it!

Glad I could help.

Jed Calvert -