why! WDi7SSD Fan replacement

Written By: Felice Suglia
  • Comments: 0
why! WDi7SSD Fan replacement

Difficulty

Very easy

Steps

6

Time Required

10 - 15 minutes

Introduction

If the fan is broken or only works noisily, it makes sense to replace it. A broken fan can lead to severe damage of other components, particularly the processor, which could overheat.

  1. siOpmGjiGNXFiThs
    siOpmGjiGNXFiThs
    3XUXlcpWsBgywMTH
    1so5casIitQ6nMQ2

    • Make sure the computer is disconnected from the power source.

    • Turn the computer over.

    • Remove the 6 screws with a 2mm Allen key.

    • Carefully remove the left and right rear panels.

  2. OmEmrO3XIO4weBLF

    • Now open the bottom of the case, to which all the components are attached.

  3. gGLNkpmYPxelawhO
    gGLNkpmYPxelawhO
    qhSjL2ewesKOPGtK

    • Remove the two Phillips PH2 screws holding the fan.

  4. j5EroihfHPduygTf
    j5EroihfHPduygTf
    5YiGJdjAWN1cIgql

    • Disconnect the cable connecting the front part (with the LEDs) to the power source.

    • Remove the part with the cable.

  5. XuaE55ZEYL16kJQT
    XuaE55ZEYL16kJQT
    3UGxI3EVDQT2k5wE
    BLl5qLJCBvpvRDsM

    • Remove the four screws on the heat sink with a Phillips PH2 screwdriver.

    • Remove the heat sink and lay it to the side.

  6. TaZSlnxQTNL22GUu
    TaZSlnxQTNL22GUu
    2wI4mKRVNujjYW6B

    • Carefully remove the fan together with its case.

    • Carefully remove the plug connecting the fan to the power source.

Conclusion

In order to reassemble your device, follow the steps of this guide in reverse order.

Author

Felice Suglia

Member since: 15/06/13

30527 Reputation

0 comments