iRobot Roomba 805 Motor Replacement

Written By: Grady Landers
  • Comments: 1
iRobot Roomba 805 Motor Replacement

Difficulty

Difficult

Steps

5

Time Required

7 minutes

Introduction

This guide will go over how to replace the motor in your iRobot Roomba 805.

  1. m2wD1LRWtRGsMv6Y

    • Remove the single 6.1mm Phillips #0 screw from the side brush.

  2. 4XZQVBvg65XbeMSK

    • Lift the side brush, removing it from the motor.

  3. ZMjGXrQeHU5QnHMo
    ZMjGXrQeHU5QnHMo
    FmGrM51HriQCjyKo

    • Remove the battery panel and the two screws behind the wheels.

    • Lift up the back panel and remove it from the Roomba.

  4. E1PimNXJM2tOaBRC

    • Remove the three screws holding down the motor. Be aware one requires a tristar bit and the plastic piece under that screw comes free easily.

    • Once the motor is loose you can pull it up out of the Roomba.

  5. 6GYFIYYOj4bNo1f3
    6GYFIYYOj4bNo1f3
    aGmr6gwN3uOvhnXW
    OBiRhATGRyYmBHSB

    • Hold the motor by the bottom and the edge of the cap and remove the cap.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Grady Landers

Member since: 05/11/19

617 Reputation

One comment

What is the point of step 5??

overkillx7 -