iRobot Braava 320 Battery Replacement

Written By: bradley boardwine
  • Comments: 1
iRobot Braava 320 Battery Replacement

Difficulty

Very easy

Steps

3

Time Required

1 - 2 minutes

Introduction

The battery is an essential component to the iRobot Braava 320. Without a functioning battery, your iRobot could have trouble turning on, staying on, or charging. Replacing the battery may solve these issues.

  1. iiNu5NhEloxKrih2

    • Flip your device over and locate the battery cover.

    • The battery cover is located in the center of the device in between both wheels.

  2. LZ1PawcQSdpMXYgd

    • Using a Flathead #4 screwdriver, gently turn the 12mm screw that holds the battery cover in.

    • The screw does not remove, it stays attached to the cover.

  3. MHMurak4GRpGlO1g
    MHMurak4GRpGlO1g
    ULRSL1uT12QWOTCE

    • Gently remove the battery from the tray and disconnect the battery cable.

    • To remove the battery, pull it straight up. To disconnect the cable, gently pull it straight out of the connector.

    • To reinstall the cable, hold it near the end and gently push it in the connector.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

bradley boardwine

Member since: 28/02/17

222 Reputation

One comment

where do I get a new battery from?

j.svetlova -