iPod Nano 7th Generation Display Assembly Replacement

Written By: Sam Goldheart
  • Comments: 3
iPod Nano 7th Generation Display Assembly Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

  1. KWRhQjkBkXTAiiCb
    KWRhQjkBkXTAiiCb
    bZ6IIq6LBStLVNjf

    • Insert a spudger under the metal midframe and display on the left side of the home button.

    • Make sure that the spudger is under the entire display assembly to prevent bending the metal midframe.

    • Rotate the spudger around the home button and across the front panel, releasing the adhesive holding the display in place.

    Is not easier to remove the LCD first from the metal midframe?

    I think this will prevent any damage to the LCD while trying to release adhesive around the home button and and the metal midframe

    rallenfl -

    I am trying to put it my LCD back on my dgitizer and there is a wire on the digitizer and i cant figure out witch way to bend it.

    Scott P. -

    esta es la manera dificil de hacerlo. Para que quitar el marco metalico del touch?

    Andreu Bonafonte -

  2. yhqK6kXMTwFmclBX

    • Once all of the adhesive has been released, gently separate the display assembly from the front glass/digitizer.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sam Goldheart

Member since: 19/10/12

465329 Reputation

0 comments