Introduction
This guide demonstrates a professional-level repair requiring advanced tools. With this special back glass separator, a broken iPhone 8/8P/X back glass can be removed in just 3 minutes. Residual glue can also be removed easily, which is convenient for subsequent attaching of a new back glass.
-
-
Wire up the Back Glass Separator. Connect the Back Glass Separator with Air Compressor via an air pipe. Switch on the Air Compressor. Open the air compressor valve.
-
Switch on the Back Glass Separator. Rotate the pressure regulating valve and set the value as 0.4Mpa.
-
-
-
Place iPhone 8 back glass assembly into the corresponding mold. Press ‘Up’. With the temperature rising to 240℃, press ‘Start’. The back glass assembly is clamped tightly by the mold.
-
After 200 seconds of heating, mandril of the machine starts to work.
-
-
-
Remove the back glass after 18 seconds. Remove glue residue on the back glass thoroughly.
-
iPhone 8 back glass separating has been completed successfully.
-
Attach a new back glass to the midframe in the end.
-
unless you are planning to replace multiple Back Glasses, purchasing a tool like this is not an interesting solution. The entire housing can be picked up for about 30$ with usb elements present ... although you will have a 4 to 5 hour job putting everything back together.
Bill McNamara -