iPhone 6 Plus Logic Board Assembly Replacement

Written By: Walter Galan

Comments: 4

iPhone 6 Plus Logic Board Assembly Replacement

Difficulty

Moderate

Steps

Time Required

No estimate

Introduction

Prereq only.

Tools

Step 1

Remove the single 2.8 mm Phillips #00 screw securing the plastic clip to the logic board.

hallo,

ich habe versucht das Gehäuse zu wechseln, dabei ist mir diese schraube der Plastikklammer im Gehäuse kaputt gegangen, heißt der Schraubenkopf ist rund. Ich habe es auch schon mit Sekundenkleber versucht, hat aber auch nicht geholfen.

Da wollte ich jetzt wissen welche Aufgabe die Plastikklammer hat und ob man die sich irgendwo bestellen kann.

Mfg

denisekoch163 - 23/02/17

Step 2

Remove the single 1.3 mm Phillips #00 screw recessed against the top of the rear case.

Step 3

Use a pair of tweezers to firmly grasp the plastic clip and remove it from the iPhone.

Step 4

Remove the single 1.6 mm Phillips #00 screw securing the antenna clip to the rear case.

Step 5

Carefully grasp the antenna clip with a pair of tweezers and remove it from the iPhone.

Hello

My iPhone After opening the security screw Antenna

Please help me find the antenna does not find

saeed - 27/09/16

You may need this part… on mine it was stuck enough to the rear facing camera cover that it almost broke when I tried to remove the cover before taking this screw out.

Matthew Goheen - 29/03/18

WARNING

This should be done in Step 35!

This ‘clip’ is a small ribbon with electronics on it. Be careful.

This clip can be adhered to the Step 35 part removal. Careful to not rip it.

Anyname - 21/02/19