Introduction
Use this guide to remove or replace the Pentalobe screws.
Tools
Parts
-
-
Power off your iPhone before beginning disassembly.
-
Remove the two 3.6 mm-long P2 Pentalobe screws next to the Lightning connector.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
8 comments
What size screwdriver do I need to remove these screws?
ronrola -
P2 Pentalobe Screwdriver
really? follow these steps in reverse to reinstall? it already is laughably short...
also how is this moderate difficulty?
When reconnecting be VERY careful not to over tighten. The connectors on the screen that these 3.6mm Pentalobe screws lock with are notorious for breaking off
Blair Tryba -
what do i do if ive managed to tighten them too hard and now they wont come off?
kristian686 -