iPhone 11 Pro Max Pentalobe Screws Replacement

Written By: Jeff Suovanen
  • Comments: 2
iPhone 11 Pro Max Pentalobe Screws Replacement

Difficulty

Easy

Steps

1

Time Required

1 minute

Introduction

Use this guide to remove or replace the two screws securing the iPhone 11 Pro Max display panel. These are the only screws on the exterior of the iPhone. They use a five-point design that is unique to Apple, requiring a specialty P2 pentalobe driver for removal.

  1. fnoVrkABTYSOR2K3
    fnoVrkABTYSOR2K3
    Nb3S1xoKwM2swfkL

    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 6.7 mm-long pentalobe screws at the bottom edge of the iPhone.

    • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

    Wie soll mann das Handy ausschalten wenn das Display defekt ist oder nicht angeht?

    Elias_Will Diamondblock -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jeff Suovanen

Member since: 06/08/13

427153 Reputation

One comment

Do the iPhone 11 and 11 Pro have the same pentalobe screws?

Ali Abdulkareem -