Introduction
Prerequisite only guide. Shows how to swing open the Display Assembly for the iPad Pro 9.7"
-
-
Use picks to ensure most of the adhesive has been cut through on the top, left, and bottom sides.
-
Twist the top and bottom picks to separate the display assembly from the rear case.
-
-
-
Swing the display assembly towards the right of the case, using the right edge as a hinge.
-
As you move the display assembly, make sure that the display ribbon cable is not being stressed.
-
Continue swinging the display assembly until it lays flat next to the rear case.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
