iPad Pro 11" Screen Cable Replacement

Written By: Chayton Ritter
  • Comments: 0
iPad Pro 11" Screen Cable Replacement

Difficulty

Moderate

Steps

6

Time Required

5 - 10 minutes

Introduction

  1. FcKSHkbrSSLYQXQQ
    FcKSHkbrSSLYQXQQ
    TIvNwPatIMWVeEVl

    • If your replacement screen didn't come with the two removable display cables, follow the next six steps to remove and transfer these cables.

    • The display cable connectors are located under a bracket near the bottom right corner of the screen.

  2. oyxdXRXSWUFPaFTL
    oyxdXRXSWUFPaFTL
    v3icFqCoNeWBYloB
    McnDI3iXxdmypdpc

    • Slide an opening pick under the non-removable display cable to loosen it from the bracket.

  3. pS4fG3Fhlyuqi2Fm
    pS4fG3Fhlyuqi2Fm
    RuWSbMKoMPUFUFHc

    • Use a Phillips screwdriver to remove the two 1.2 mm screws securing the display cable bracket.

  4. iGisln1eamIwVh16
    iGisln1eamIwVh16
    dy1Gp4EeqoiaMMMe

    • Remove the display cable bracket.

  5. RTbnRNGeejDkJ2NI
    RTbnRNGeejDkJ2NI
    bq6FhD6qkR64dESr
    HSnAIQfaHsBFGXQm

    • Use the flat end of a spudger to pry up and disconnect the narrow display cable.

    • Remove the narrow display cable. Set it aside for reassembly.

  6. n6KgpUAoYEkyfowd
    n6KgpUAoYEkyfowd
    K4USIOsMEKErDhVQ
    VFytVsN12lHZiMPI

    • Disconnect and remove the wide display cable. Set it aside for reassembly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Chayton Ritter

Member since: 21/08/20

17428 Reputation

0 comments