iPad Mini CDMA Speakers Replacement

Remove two 1.4 mm #00 Phillips screws securing the left and right speakers to the rear case.

Insert the tip of a spudger into the gap between the left speaker and the bottom left side of the rear case.

Pry around the bottom of the speaker, sliding it out from its recess in the rear case.

Once enough of the speaker is exposed, grasp it and pull it away from its recess in the rear case.

Remove the left speaker from the iPad.

Use the tip of a spudger to slide the right speaker slightly toward the outside of the iPad.

Insert the tip of a spudger into the gap between the right speaker and the bottom right corner of the case.

Pry the speaker out from its recess in the rear case.

Once enough of the speaker is exposed, grasp it and pull it away from its slot in the rear case.

Remove the right speaker from the iPad.

Remove two 2.8 mm Phillips #00 screws from the base of the Lightning connector.