Introduction
Prereq only, does not remove antenna, battery is in.
-
-
Remove the following screws securing the GPS antenna to the rear case:
-
One 2.5 mm Phillips #00
-
Two 1.1 mm Phillips #00
-
One 1.2 mm Phillips #00
-
-
-
Use the flat end of a spudger to loosen the foam adhesive holding the GPS antenna to the right speaker.
-
-
-
Gently de-route the antenna cable from the bottom right corner of the rear case.
-
Move the antenna out of the way of the right speaker.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
