Introduction

Prereq only.

  1. UWNAdAkM42sCGyDD
    UWNAdAkM42sCGyDD
    AZ4HAkRIxHjENLhk
    • Use the tip of a spudger to peel the tape off of the antenna cables near the logic board.

  2. CjTjfaK5sIdFM1kN
    CjTjfaK5sIdFM1kN
    AjP1xRJXelpu5F3G
    • Use the point of a spudger to separate the adhesive holding the antennas to the right speaker.

  3. WBOUKfykOMXfexEt
    WBOUKfykOMXfexEt
    Qrlxt2UO3LnqJJVA
    • Use the point of a spudger to lift the antenna cable adhesive up off the rear case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Member since: 19/10/12

465332 Reputation

0 comments