iPad 2 CDMA LCD Assembly Replacement

Written By: Jake Devincenzi
  • Comments: 0
iPad 2 CDMA LCD Assembly Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

Pre-req for antennas

  1. OH1yCCNGThrkmgUt
    OH1yCCNGThrkmgUt
    XsiBUaIMPCd6daDm
    uX3nhTOKhUhFTZ3I

    • Carefully lay the LCD next to the rear panel.

    • Use a plastic opening tool to lift the display data cable lock upwards.

    • Pull the display data cable out of its socket.

    • Do not pull the connector upward as you disconnect it from its socket.

  2. NBxbuN1ufwZKbRrs

    • Remove the LCD assembly from the rear panel assembly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jake Devincenzi

Member since: 18/04/11

117228 Reputation

0 comments