iMac M1 24" Display Replacement

Written By: Thomas B
  • Comments: 1
iMac M1 24" Display Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

  1. Wjt2hnLBN1NsdmOL

    • Start by gently peeling the adhesive off of each side of the iMac by using the iMac Opening Wheel.

  2. 5axdJ2BaJnH1maVk

    • After the adhesive has been removed, you can use a suction cup to help remove the display from the case.

  3. RRnsnAywDITlY4xU

    • Next, carefully remove the three cables.

    • (From left to right) The first cable can be removed with a prying tool or with a fingernail. With the second, the tab on the ZIF Connector must be flipped up so that the cable can be removed. The third requires the tab on the left of the connector to be flipped up to allow it to be removed.

  4. iGTfOKRY6bxLcAtY

    • The display can now be removed. In order to install a new screen follow the instructions in the reverse order.

    • It is highly recommended to apply new adhesive, when reinstalling the screen.

Conclusion

To reassemble your device, follow the steps in reverse order.

Author

Thomas B

Member since: 07/01/21

506 Reputation

One comment

Will this cause an issue with true tone and the front camera similar to iPhone screen replacements?

Kane Snyder -