Introduction

Prereq only for removing the logic board, fan and power supply are out.

  1. 36DsTBiHTPsP5aVU
    36DsTBiHTPsP5aVU
    gTU24uLBYOIv4Mhy
    KNinFGbODGTjoQq1
    • Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess.

    • The hard drive is attached by two cables, do not attempt to fully remove it from the iMac.

  2. ZxnqxTBEoc4w2LRN
    ZxnqxTBEoc4w2LRN
    ZlayYFLKmfxikbiA
    • Disconnect the SATA power cable.

  3. W1BnV1ZiStMgG441
    W1BnV1ZiStMgG441
    QSE3SSpfyUcdRarK
    • Unplug the SATA data cable from the hard drive.

  4. JCpSSKHxwDXCIdI2
    • Remove the hard drive from the iMac.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Walter Galan

694047 Reputation

0 comments