iMac 27" 2017 Hard Drive Assembly Replacement

Written By: Adam O'Camb
  • Comments: 0
iMac 27" 2017 Hard Drive Assembly Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

Prerequisite-only guide to remove the hard drive in an iMac 27" 2017.

  1. PxrBBFccE4MtyuK4
    PxrBBFccE4MtyuK4
    NnvsFkOCqGgxcfLJ

    • Pull straight up on the SATA data/power cable to disconnect it from the drive.

  2. fCNkWjKoRWTh4qNL

    • Remove two 7.3 mm T8 screws securing the left hard drive bracket to the rear case.

  3. ZPshuwLMgNCFLAaa
    ZPshuwLMgNCFLAaa
    aOTBHoVAI4tOTwDi
    TuVHwNPAYMsMlSfk

    • Grab the hard drive and left hard drive bracket together.

    • Tilt the left side up away from the rear case, and slide the assembly to the left.

    • Remove the hard drive and left hard drive bracket from the iMac.

  4. tIFnVNlWZtiKmhrx
    tIFnVNlWZtiKmhrx
    2dW6UjdVRe56RwvN

    • Remove the left hard drive bracket.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Adam O'Camb

Member since: 11/04/15

195421 Reputation

0 comments