Introduction

  1. TrJ4rIH3CdySxuYu
    • Turn the phone off.

  2. BijGvwyPjZBGwKBe
    • Remove the back panel with an opener tool.

  3. bcMwE4i21LMZNB5D
    • Lift out the battery using an opener tool.

  4. wsAY62FWCrAjlqSN
    • Remove the SIM and SD card.

  5. IXmfaYGvexGZfUZe
    • Remove the 10 4 mm Phillips screws on the back of the phone using the #00 Phillips screwdriver.

  6. u1J6kiYiOLYFdsNH
    • Starting at the USB jack, slide the opener around the perimeter of the phone between the rear case and the frame. This will loosen the clips.

  7. sfRg5eiIE3rgGjhb
    • Carefully remove the back case and middle frame and expose the inside of the phone.

  8. A2PhwHpFEtBZQTxC
    • Disconnect the foil cable.

  9. BthiOTQHWQTHcOti
    • Lift the corner of the board and remove the audio jack.

Conclusion

Work the steps in the reverse order to assemble your device again.

Peter Hübner

Member since: 08/08/18

409 Reputation

0 comments