eufy RoboVac 11 Front Cover and Motherboard Replacement

Written By: Kyleigh Hill
  • Comments: 0
eufy RoboVac 11 Front Cover and Motherboard Replacement

Difficulty

Easy

Steps

5

Time Required

5 minutes

Introduction

  1. sIQO3ujU5YNUmfdK
    sIQO3ujU5YNUmfdK
    evbpWJrcmhxQxMsk

    • Remove the nine 10 mm screws with the Phillips #1 precision screwdriver.

    • Keep track of these screws. They are the same length as the interior screws but wider in diameter.

  2. sp5wJVAEH1GJL5en
    sp5wJVAEH1GJL5en
    IsbsOcMXTwkAdvdo

    • Remove the six 7 mm screws on the bumper with the Phillips #1 screwdriver.

  3. 1PnkaUXHwKeMCXuj
    1PnkaUXHwKeMCXuj
    tGCdluxjZKIcNxVp
    y6A4xJUWiwp2cbuL

    • Remove the top plate from the body of the device.

    • Unplug the bumper from the motherboard.

  4. fZuFuyCyfPOwQNnS
    fZuFuyCyfPOwQNnS
    vgRmtOKpHNrZjeRx

    • Remove the three 10 mm motherboard screws with a Phillips #1 screwdriver.

    • Cleaning the motherboard and inside of the device outdoors with a compressed air cleaner will help the robot last longer.

  5. 6shUHAh1EXCmQ1WM
    6shUHAh1EXCmQ1WM
    NYyo1Yj3OgKGWPVT

    • Unplug the cables from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kyleigh Hill

Member since: 28/09/22

223 Reputation

0 comments