Xiaomi Yi Back Panel Replacement

Written By: Karol Gonzalez
  • Comments: 2
Xiaomi Yi Back Panel Replacement

Difficulty

Moderate

Steps

7

Time Required

2 minutes

Introduction

If your camera's back case is damaged, you might consider changing it. To remove the back panel you will need a small blue plastic opening tool.

  1. sFcVWZYBHmLqMhZj
    sFcVWZYBHmLqMhZj
    EeNl1hTyAmP4Us4C

    • Push the battery door switch to the left.

    • Lift the battery door up.

  2. S4S4V1ZpcnPq5tvr
    S4S4V1ZpcnPq5tvr
    Gd3PQA4IyHDT1lJm
    G6eTX6xM2aQOQM6i

    • Lift the battery tab up.

    • Remove the battery by pulling the removal tab.

  3. OIic3D1eOtPsfhDH
    OIic3D1eOtPsfhDH
    NH5lnA6vNgT3yjpX

    • Introduce the plastic opening tool into any of the sides of the camera.

    • Pry with the plastic opening tool at the seam between the front and the back panel.

  4. SkYtmrQZORHZ1DTo
    SkYtmrQZORHZ1DTo
    wBATGNQRKRGQqxOI
    WBncT1rLsCTZFadQ

    • Slide prying tool along the seam until front panel is fully separated from the back panel.

  5. A6CgOujCo1bITmSw
    A6CgOujCo1bITmSw
    nc2PjrUOafJsMPXI

    • Remove the four 3.8 mm Phillips #000 screws located in the outer corners of the motherboard.

  6. NMGIF2pXbDubRcCR
    NMGIF2pXbDubRcCR
    kdw4S3ihxJKYSwGM
    igfehO5FMYrYVxYp

    • Pull on and remove the black spacer located at the top inside of the camera body using the tweezers and set the part aside.

  7. bEvxKlxjO3Y6oAHG
    bEvxKlxjO3Y6oAHG
    NrUTTDDi4gD25lKB

    • Remove the motherboard from from the back case by gently pulling on the lens housing.

    • Back panel remains.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Karol Gonzalez

Member since: 03/09/15

379 Reputation

2 comments

Where can I buy back panel for Xiaomi Yi?

matulek -

Where can i buy the back panel replacement ?

Roland Meilleur -