WowWee CHiP Robot Dog Wheel Replacement

Written By: Joseph Dantes

Comments: 7

Difficulty

Very easy

Steps

Time Required

4 minutes

Introduction

Tools

Mako Driver Kit

Step 1

Place CHiP on its back so that its stomach is facing you.

Step 2

There are three small hex screws connecting the battery to CHiP. Remove all screws with a hex screwdriver and remove battery casing.

Cant get the eyes to lite up, suggestions?

Daniel peters - 06/02/21

Step 3

Once the top face of the battery is off, you will see a small rectangular box that the batteries are inside. There are 4 Phillips head screws in the box. Remove all screws with a Phillips head screwdriver.

what is the purpose for removing the battery if you cannot buy a new one?

v scigliano - 27/12/20

I need a new batties in my chip dog. Please tell me we're can u get it from and bed stand

janie alexander - 01/06/21

Step 4

Once the battery is removed from body, the battery should be connected by a red and black wire. There is a red rectangular connector that easily pulls apart. Pull apart the red rectangular connector.

where i find this battery

Abodi Jml -

Step 5

Locate wheel to replace.

Step 6

Twist grey wheel cap in counter-clockwise rotation.

Step 7

Pull and remove wheel.

можно не отключать.а в каком положении должны быть инкодеры при таком положении лап? при замене шестеренок, как правильно выставить нулевое значение инкодера?

Aleksey -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Joseph Dantes

Member since: 02/10/18

514 Reputation

2 comments

Why do you have to disconnect the battery before changing the wheel? Can you not just turn off the power and change it?

shawna_beji -

зачем снимать акб?

замена или снятие колес происходит при простом отключении устройства обычным выключателем.

Руслан Смоленск -