Wii Balance Board Foot Replacement

Written By: Cory Olson
  • Comments: 3
Wii Balance Board Foot Replacement

Difficulty

Easy

Steps

4

Time Required

10 minutes

Introduction

This guide will demonstrate how to remove and replace the feet on the Wii Balance Board.

  1. hQqRBnmXANMIaaWW

    • Flip device upside-down so the plastic white board is facing the ground.

    • Locate the four feet in the corners of the Balance Board.

    • Unscrew the three 12.7 mm Phillips screws from each foot cover.

  2. GfnHhyWUckXW333L

    • Remove the gray plastic ring from the actual foot by lifting it up.

  3. JZ6SJOlBkxsg4wmF

    • Separate the loose foot from the device by lifting it up.

  4. S4ExApXeM2MiTA2Y

    • Repeat steps two and three on the remaining four feet.

    how to completely remove and then put back in would be helpful as that's what the title of this post is…. right?

    Nelda Murray -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Cory Olson

Member since: 29/09/14

891 Reputation

2 comments

I am in need of a foot cover. Where can I find one??

Marvin Hopper -

This manual did not help

nbrown1959.nb -