Introduction
This guide provides instructions for removal of the glass lens cover on the front of the camcorder's water proof case. There are small screws and a glass part in this repair, so have a clean work space and keep the case on a flat surface to avoid losing screws or dropping the glass lens cover.
Tools
-
-
While holding the black lens cover trim tight to the case, flip the case over so that the lens cover is rested on your work surface.
-
-
-
Apply pressure to the lens cover with your thumb, and use your other fingers to pull up on the case, separating the lens and lens trim from the case.
-
-
-
There is a small plastic key on the black bezel that aligns it to the case. Be sure to line this up during reassembly.
-
To reassemble your device, follow these instructions in reverse order.
One comment
Hello, do you know where I can acquire a replacement water proof case for my Vivitar DVR 787 HD action camcorder?
Saya minat dengan cas nya gmna cara pesannya gan
Longor87 Qwertyuiop -