VTechCS6719-16 Screen Replacement

Written By: Charles montes
  • Comments: 0
VTechCS6719-16 Screen Replacement

Difficulty

Moderate

Steps

7

Time Required

5 minutes

Introduction

This guide demonstrates a walk-through of steps needed to completely dismantle the phone in order to locate the screen cover and replace it with a new one.

  1. cyNNyVDiXXKnArX2

    • Slide the back cover off the cause.

  2. chFfxQZBTcCcldDy

    • Lift the battery.

    • Unplug the two pin cable from the connector.

  3. yp1fPSQftGIJVS3R

    • Unscrew the two 10mm screws in phone base.

  4. YMYnWLwZFPrwOLMn

    • Using the metal spudger gently, but firmly edge along the device .

    • When you feel a hook or latch use a firm but gentle lifting motion upward to unlatch the front and back case.

  5. LFwc261IXjF5dDxE

    • Unscrew a second set of 10mm screws to access to the other side.

  6. nDM2Jp3j15lCaJmS

    • The front case is now free and able to be manipulated.

    • Set aside the circuit board and back case as they will get in the way.

  7. PMSfg541dXqCFsTh

    • Using a single finger apply a light force on the screen cover to release from the case.

    • Now the old screen can be replaced with a new desired one, simply properly align and it will clip into place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Charles montes

Member since: 20/10/16

513 Reputation

0 comments