VTech CS6719-2 Base Fuse Replacement

Written By: Nick Boyd
  • Comments: 0
VTech CS6719-2 Base Fuse Replacement

Difficulty

Difficult

Steps

6

Time Required

15 minutes

Introduction

During this guide, the base will need to be disassembled and the board flipped over to desolder the fuse connection.

  1. FpowwHuWBO1jDXeG
    FpowwHuWBO1jDXeG
    ytQTv1RfRfgX1BIK

    • Remove the four Phillips #0 screws (9.4mm) located at the bottom of the phone on the back side of the base.

  2. c1jZneNANmHWAWq6

    • Use the spudger to separate the bottom from the top.

    • There are two clips, located top and bottom, that you have to compress with the spudger.

  3. mHqFSUR1uTbH54qr

    • Locate the fuse.

  4. DLYHmJGJuKtYIdHO

    • Flip the board over.

    • Remember where the fuse is located.

  5. K4LdutHYCwFdgyPw

  6. SU1JHWlKABXv5ZbA

    • Flip the board back over and remove the fuse.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Nick Boyd

Member since: 08/02/16

285 Reputation

0 comments