Unfasten Battery

Written By: Alex Diaz-Kokaisl
  • Comments: 0
Unfasten Battery

Difficulty

Moderate

Steps

8

Time Required

No estimate

Introduction

This is a prerequisite-only guide! This guide is part of another procedure and isn't meant to be used alone.

  1. V6HRF5PhuNXBZIUj

    • Use a Phillips screwdriver to remove the five screws securing the display cable bracket:

    • Four 1.1 mm-long screws

    • One 2.0 mm-long screw

  2. XS1rYpIeJTVM21jc
    XS1rYpIeJTVM21jc
    kxYSdsAFJgcYUWRn

    • Use tweezers, or your fingers, to remove the display cable bracket.

  3. 2fpRXKeGwNmyi2Du
    2fpRXKeGwNmyi2Du
    2upDJYrgOmA2lp5X

    • Use a spudger to pry up and disconnect the SIM card reader cable press connector.

  4. p64wh6yYUWPuEt2c
    p64wh6yYUWPuEt2c
    VTgBl1gLMn1BmOTS

    • The SIM card reader cable is lightly adhered to the battery.

    • Use tweezers, or your fingers, to peel the SIM card reader cable away from the battery connector.

  5. O2DT6hSaXUbrFcBG

    • Use a Phillips screwdriver to remove the 1.7 mm-long screw securing the battery connector to the logic board.

  6. gFthWO1ZtYuBWEfT
    gFthWO1ZtYuBWEfT
    kyVhCI1hEQ1cGl1P
    djYDlGp1VHnYrBiM

    • Use a spudger to pry up and disconnect the two top display cable press connectors.

  7. IoZdgHhCxwwLWTEi
    IoZdgHhCxwwLWTEi
    EVJOmEWx66ZKWfmM
    mIJguOgARJS2tffA

    • Use a spudger to pry up and disconnect the two bottom display cable press connectors.

  8. aDKJFlV1seFuADYW
    aDKJFlV1seFuADYW
    rqh2OZyTF6EGbYrs
    EWqsVFIekNv2cjZA

    • Remove the screen.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Alex Diaz-Kokaisl

Member since: 16/01/22

117881 Reputation

0 comments