Toshiba Tecra Z50-A Speakers Replacement

Turn off the laptop.

Flip the laptop over so the bottom is facing upwards and the hinges are closest to you.

Remove the fifteen 5 mm screws from the back panel using a Phillips #0 screwdriver.

Lift up back panel using your hands and remove it from the rest of the laptop.

Lift the plastic covering over the battery plug.

Pull the wired cable up towards the top of the laptop to disconnect it from its socket on the motherboard.

Remove the single 2 mm screw from the corner of the laptop using a Phillips #0 screwdriver.

Remove the three 3 mm screws from the battery using a Phillips #0 screwdriver.

Lift up on the battery with your hands and remove it from the laptop.

Lift up on the hard drive.

Pull out the plug from the hard drive.

Lift up on the tape holding the bundled speaker wire down.

Pull the bundled wire out of its socket on the motherboard.

Lift up on the left speaker with a spudger.

Lift up on the right speaker with a spudger and remove both speakers from the laptop.