Toshiba Satellite E45t-B4300 Bottom Case Replacement

Written By: Joshua Swanson
  • Comments: 0
Toshiba Satellite E45t-B4300 Bottom Case Replacement

Difficulty

Easy

Steps

6

Time Required

3 - 5 minutes

Introduction

Use this guide to replace a damaged bottom case on a Toshiba Satellite E45t-B4300.

  1. GTZrlYWCDWCnBeiF
    GTZrlYWCDWCnBeiF
    3Fegxq1HVAi6eltF

    • Power off your laptop before continuing.

    • Remove the following two 4mm screws with a Phillips #0 screwdriver.

  2. VLc2gTqPrtDh6jo4

    • Slide the battery out towards you.

  3. RFPZGwOdkHVnJCcm

    • Remove the following twelve 4mm screws with a Phillips #0 screwdriver.

  4. Uo6efJNiZTYeCnhs

    • Use a spudger to depress the six white clips connecting the plastic cover

  5. YRv2HIRvCqbZx2ET

    • Run the spudger or a plastic card around the entire laptop to release the rest of the clips.

  6. Tm6bGBIfRNfhPhJB

    • Remove the cover and set to the side.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Joshua Swanson

Member since: 20/02/17

701 Reputation

0 comments