Introduction
Prerequisite only! This guide shows how to remove and replace the right spindle shaft on the Toro Walk Behind Mower 21199HD 2018.
Tools
Parts
-
-
While holding the deflector up and out of the way, lift the grass bag handle away from the mower to detach it.
-
Remove the grass bag.
-
-
-
Use a 3/8-inch socket to remove the four bolts securing the belt guard:
-
Three 1 inch-long recessed bolts
-
One 1 1/2 inch-long bolt
-
-
-
Lift the belt up and over the left sprocket.
-
Move the belt to the front of the mower, out of the way of the belt tensioner.
-
Spin the left sprocket, with the blade attached underneath, until it is in a safe position, then place the belt on the sprocket.
-
Spin both blades to ensure they don't touch during a 360˚ rotation.
-
-
-
Use an impact wrench with a 3/4 inch socket to remove the right sprocket bolt.
-
If necessary, use a punch or screwdriver to lock the sprocket in place during removal, lining up the hole in the sprocket with the hole in the blade guard.
-
-
-
Grabbing the spindle shaft from the bottom, lower it down through the spindle.
-
Remove the spindle shaft from underneath the mower.
-
To reassemble your device, follow these instructions in reverse order.