Toro Walk Behind Mowers 21199HD 2018 Belt Cover Replacement

Written By: Carsten Frauenheim
  • Comments: 0
Toro Walk Behind Mowers 21199HD 2018 Belt Cover Replacement

Difficulty

Moderate

Steps

6

Time Required

No estimate

Introduction

Prerequisite only! This guide shows how to remove and replace the plastic belt cover on the Toro Walk Behind Mower 21199HD 2018.

  1. OQZtGFtkEF4vBvq4
    OQZtGFtkEF4vBvq4
    dACKYQwkbMXRhRdD

    • Before you begin, ensure that the mower is powered down and cool to the touch.

    • Grab the plastic housing at the end of the spark plug wire and pull firmly to disconnect it.

  2. 363TiR4yDRMrpZjN

    • Chock the rear wheels to prevent the mower from rolling during service.

    • If the blades are extremely dirty, you can clean them using the washout fitting so the bolts on the underside of the blade guard are accessible.

  3. r4FAZqANvZOFfbU6
    r4FAZqANvZOFfbU6
    mpPFBORU2IhiTIxL

    • Lift up the plastic deflector.

  4. xknjbavIsPvnHD5B
    xknjbavIsPvnHD5B
    UpQo4tj3Xwr5X56o
    HbnY1bo3DsGj4bmX

    • While holding the deflector up and out of the way, lift the grass bag handle away from the mower to detach it.

    • Remove the grass bag.

  5. OtZDf6pEoYlDCoHj
    OtZDf6pEoYlDCoHj
    CAum1c454yfKO2wP
    Wv4PTu2ryYYPL3rK

    • Use a 3/8-inch socket to remove the four bolts securing the belt guard:

    • Three 1 inch-long recessed bolts

    • One 1 1/2 inch-long bolt

  6. jlByBSnSo1PVxIrq
    jlByBSnSo1PVxIrq
    KBWWgcKaFjMj3h5u

    • Pull the belt guard straight off the front of the mower to remove it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Carsten Frauenheim

Member since: 10/03/20

110978 Reputation

0 comments