Tilting the EDCO Floor Stripper TS8 .75L (2017)

Written By: Robert Boyd
  • Comments: 0
Tilting the EDCO Floor Stripper TS8 .75L (2017)

Difficulty

Easy

Steps

3

Time Required

No estimate

Introduction

This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.

Follow this guide to safely tilt the EDCO Floor Stripper TS8 .75L (2017) with wheel chocks.

  1. DnshL2WqddCVCRL1

    • Before you begin, ensure the device is powered down and cool to the touch.

    • Ensure the machine is unplugged.

    • Turn the power switch counterclockwise into the OFF position.

  2. DEiALoepEXPqwPrb
    DEiALoepEXPqwPrb
    KsYwppvPLZYjfsUl
    OnwhFKKxBMiouTc6

    • Tilt the device back to rest on its handle.

    • Ensure that the four 9/16 inch motor mount bolts are tightened before tilting the device.

  3. JFUNfqYm1KYhvLDV

    • Insert wheel chocks behind the wheels to ensure the device does not move or fall during the repair."

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Robert Boyd

Member since: 01/02/21

26261 Reputation

0 comments